Setup Functions; First Use After Installation; Instruments Requiring Commissioning - Raymarine ST70 User's Reference Manual

2

Setup functions

In addition to the eight operational pages, setup menus and pages controlled by the
front-panel buttons, enable you to access and change the instrument parameters.
To choose option 1
press
Each setup menu provides a number of options. Use the
the menu item you want, then press
When a menu selection results in a setup page, use the
value or make the selection that you want. Press
If at any time during setup, you want to leave a setup function without making any
changes, press

First use after installation

When an ST70 instrument is first switched on after installation, what you see is
dependent on whether the instrument requires commissioning or not.

Instruments requiring commissioning

If the ST70 instrument is NOT part of a SeaTalk
ST70 instrument is already working, an initial setup mode is automatically engaged
and at first switch on, a Language setup page is displayed (see Figure 1-1: Initial
setup). This is the first part of the commissioning procedure and enables you to set:
• Language.
• Vessel type.
• Time and date formats.
• Local time value.
• Units.
Details of how to set these values and commission the instrument are given in
Chapter 2: Commissioning Procedures.
Note:
The values set during initial setup can be changed subsequently via the Main Menu (see
Figure 1-2: Normal operation).
Menu Title
1 2
Selected option
Information box
i
Press ENTER to select
CANCEL
.
ST70 Instrument User Reference Manual
To choose option 3
press
3
ENTER
to confirm your selection.
ENTER
ng
system in which at least one other
< >
and buttons to scroll to
< >
and buttons to set the
to confirm your choice.