Instrument Controls; Adjusting The Displays Brightness - Raymarine i70 Quick Reference

Instrument controls

Control layout and functions.
1
Item
1.
2.
3.
4.
2 3 4
Description
LEFT SOFT BUTTON Power,
brightness, cancel, back
UP ARROW Up navigation, Adjust Up
DOWN ARROW Down navigation,
Adjust Down
RIGHT SOFT BUTTON Menu, select,
OK, Save
Powering the instrument on
1. Press and hold the LEFT SOFT button for 1 second, until the
Raymarine logo appears.
The instrument will load to favorites page one.
Powering the display off
1. From any favorite page press and hold the LEFT SOFT button.
After 1 second a power down pop up will appear.
2. Continue to hold the LEFT SOFT button for a further 3 seconds
to complete the power off

Adjusting the displays brightness

To adjust the brightness of the individual display:
1. Whilst in a favorite page momentarily press the LEFT SOFT
D12065-1
button.
This will open the brightness setting screen.
2. Use the UP and DOWN buttons to change the brightness
percentage to the required level.
3. Press the RIGHT SOFT button to confirm new brightness and go
back to the favorites page you were on.
Simulator
The Simulator mode enables you to practice operating your display
without live data from a transducer or other connected peripherals.
The simulator mode is switched on/off in the Simulator option from
the Setup Menu.
3