Basic Controls; Overlay Options - Raymarine ALPHA Operating Instructions Manual

Note:
Default data pages can be further edited or removed to suit your
preference. For more information, refer to the following sections:
• p.22 — Deleting pages
• p.31 — Widget creation and customization
Note:
For more information on the default pages that are configured on your
performance display, refer to the following section:

3.6 Basic controls

You can switch between data pages by either swiping to the left or right.
Data pages will loop if you reach either the start or end and continue to
swipe left or right.
Once your last data page has been reached, swiping to the left or right again
will cause the selected page to loop back to the start.
Swipe left (change page)
Each of the display's default pages, user preferences and settings can be
customized by selecting one of the options available via the overlay menu,
which appears when swiping downward from the top edge of your screen.
The overlay menu and other pop-ups can be dismissed by either swiping
upward from the bottom edge of your screen (overlay menu only), by tapping
outside of the window, or by waiting for an automatic time-out to occur.
16
p.25 — Page presets
Swipe right (change page)
Swipe down (open overlay)

3.7 Overlay options

The following options are available via the [Overlay menu]:
1. [Screen lock]
2. [Power save]
3. [Pages]
4. [Settings]
5. [Brightness bar]
Swipe up / tap off / automatic
time-out (dismiss overlay)