Cancelling Alarms; Man Overboard - Raymarine E140 Quick Reference Manual

Cancelling alarms

1. Press the ACKNOWLEDGE softkey.

Man overboard

If you lose a person or object overboard, you can use the Man
Overboard (MOB) function to mark the position.
The MOB function is available at all times, regardless of which
application is running.
When MOB is activated, an alert message appears on-screen, and
an emergency waypoint is created. A bearing to the waypoint is
also provided. The alert and emergency waypoint also appear on
any networked displays at the same time.
Activating the man overboard function
1. Press and hold the WPTS/MOB button for 3 seconds.
10
The normal chart application is reset to the same settings that
it had before the MOB alarm was raised.
Note: To obtain a MOB position, your multifunction display must
have a GPS position fix.
Cancelling a MOB alarm
1. Press and hold the WPTS/MOB button for four seconds.
Once the MOB alarm is cleared:
• the chart application motion mode is reset.
• the databar mode is reset.
• GOTO and route functions are restored.
E-Series Widescreen Quick reference