Part Assignment For Original Song Playback; Overall Song Playback Volume Control - Yamaha Clavinova CVP-59S Owner's Manual

Part Assignment for Original Song Playback

Before an original song disk is played, specify the tracks to be turned on and off by the PART 1 and
PART 2 LCD buttons via the SONG PLAY [PART ASSIGN] display.
Use the PAGE buttons to select the SONG PLAY [PART ASSIGN]
display (SONG PLAY page 6), then use the PART 1 and PART 2 pa-
rameters to assign the desired tracks to the corresponding parts. For
either part the corresponding
track, or the data dial or [+]/[–] buttons can be used once the parameter is
selected.
The default settings are: PART 1 = Track 1, PART 2 = Track – – (off).
Tracks 1 through 16 can be selected for both parts 1 and 2, and part 2 can
additionally be turned off. The same track cannot be assigned to both
parts.

Overall Song Playback Volume Control

The ABC/SONG VOLUME control can be used to control the over-
all volume of song playback. Whenever a song is first selected, however,
the maximum volume setting (=standard volume level setting) is recalled
regardless of the position of the ABC/SONG VOLUME control. The
song playback volume can then be adjusted as required.
Disk Orchestra Collection & Song Playback
and buttons can be used to select a
VOLUME
MASTER ABC/SONG
VOLUME VOLUME
MAX MAX
MIN MIN
• The [PART ASSIGN] display will not
appear when Disk Orchestra Collection
or Disklavier data (see "Playing Other
Types of Music Data", page 71) is
being played.
• If ABC is turned on during the playback
of an original song that was recorded
without ABC, the ABC/SONG VOL-
UME control will affect the ABC sound
rather than the song playback sound.
• ABC cannot be used during playback
of a song recorded with ABC or Disk
Orchestra Collection playback.
65