AT&T SYSTEM 25 User Manual page 32

Single-line terminal

Hide thumbs Also See for SYSTEM 25:

Table of Contents

Programming Speed Dlallng Codes (Continued)

Using #8 to Start End-to-End Signaling

When you place a " # 8" within a stored number, you tell the

system to start end-to-end signaling.

For example, you may want to store a telephone number (555-

4444) to be dialed and an identification code (12345) that should

be transmitted directly to the far end.

You program: 9*5554444* * # 812345

This means: 9 (1,5 second pause) 5554444 (3 second

Programming or Removing Personal Speed

Dialing Codes

You can program a maximum of 25 characters into a Personal

Speed Dialing code.

Programming or Removing a Number

1 Lift the handset and listen for dial tone.

2 Dial

3 Dial the number you want to program.

4 Dial the Personal Speed

5 Listen for confirmation tone and then

pause) (start end-to-end signaling) 12345

If you want to remove a

step 4.

through # 39) being added or removed,

including the

hang up.

number, continue to

Dialing code ( #20

Table of Contents