Output Subsystem; Docuprint 180 Lps Production Process Overview; Sources Of Input For The Docuprint 180 Lps - Xerox DocuPrint 180 Product Manual

BASIC CONCEPTS

Output subsystem

DocuPrint 180 LPS production process overview

Sources of input for the DocuPrint 180 LPS

2-4
The output subsystem provides paper stacking, report collating, and
sample print capabilities.
The process of producing a job on an DocuPrint 180 LPS can be
broken down into three distinct phases: input, special processing,
and output. Figure
2-2, illustrates these three phases below.
Figure 2-2. Basic processing flow
A description of each phase is described in the input section that
follows.
The input phase of job production begins with the collecting and
inputting of data using one of the following sources:
Several data input methods are available, as shown in figure 2-3
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE