Xerox DocuPrint 180 Product Manual page 59

XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE
PRODUCT DIFFERENCES/USER CONSIDERATIONS
Table 5-3. Will this 4650 (V3.5) job print on my DP 180 LPS?
Job features from 4650
(V3.5)
Clusters
Edgemarking
Fonts
Graphics
Labels
Page density
Paper sizes
Paper stock
Stitch commands
600 dpi input
300 dpi with interpolated
600 dpi output
Results when run on DP 180 LPS)
Job prints. Operator needs to redefine
clusters if tray differs.
Job prints.
Job prints if the fonts and character sets
used are loaded on the DocuPrint 180
LPS or if sub-stitutions for these fonts
are defined.
Job prints if sufficient graphic memory is
available and input source is 300 dpi
resolution.
Job prints using only paper-faced labels.
Refer to the Xerox DP 180 LPS Operator
Guide for loading instructions.
Job prints.
Job prints.
Job prints if it does not use edge
reinforced 3-hole stock.
No stitcher available on DP 180 LPS,
therefore stitch commands are ignored
and job prints unstitched.
Job prints in 300 dpi. The 4650 LPS is
the only Xerox LPS that accepts 600 dpi
input.
Job prints.
5-5