Xerox Docuprint 180 Lps Features - Xerox DocuPrint 180 Product Manual

XEROX DOCUPRINT 180 LPS OVERVIEW

Xerox DocuPrint 180 LPS features

System controller
1-10
Listed below are features of the Xerox DocuPrint 180 LPS.
The following are features of the system controller:
•
PC UI (refer below)
•
Three 1.2 GB formatted system disks standard
•
1024K words of control memory
•
Minimum of graphic, ink, and font memory (GIFM) of 256 Mb.
•
3.5-inch floppy disk drive (optional Media Conversion Kit)
•
Quarter-inch cartridge tape drive (QIC); up to 320 MB capacity
in streaming mode; quarter-inch ANSI (standard)
•
Front loading 9-track (1600/6250 bpi) magnetic tape drive
(requires optional peripheral cabinet)
•
Xerox 36-track cartridge tape drive; reads 18-track and 36-track
tapes and has the write capability for IBM- and ANSI-
compatible half-inch tapes in the 36-track IBM 3480/3490 data
format (requires optional peripheral cabinet).
PC UI The following are features of the PC UI:
•
The PC User Interface (PC UI) is a Pentium-based processor
PC with at least 100-megabyte hard disk, mouse pointing
device, 3.5-inch floppy disk drive, multinational keyboard, and
14-inch color monitor..
•
Color graphic windows and icons
•
Full text editor allows you to perform complete textual editing
tasks (such as moving, searching and replacing, adding and
deleting text, and so on) on the entire file, within a window
environment
•
File transfer provides a two-way file transfer between the PC UI
floppy or hard disk drive and the system controller hard disk
•
Start command library stores often-used start commands for
easy selection with mouse; no need to key in start commands
repeatedly
•
Command line mode accessible from PC UI windows
•
Console logging allows you to print, display, or save DocuPrint
180 LPS activity record for tracking or service purposes
•
Multinational language and feature support.
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE