Xerox DocuPrint 180 Product Manual page 58
Xerox laser printer product guide
Hide thumbs
Also See for DocuPrint 180:
- Message manual (356 pages) ,
- Configuration manual (276 pages) ,
- System configuration manual (132 pages)
Table of Contents
Advertisement
PRODUCT DIFFERENCES/USER CONSIDERATIONS
5-4
Table 5-2.
Will this 4050/4090 (V3.5) job print on my Xerox
DocuPrint 180 LPS
Job features from 4050/
4090 (V3.5)
Programmable bypass
transport
Clusters
Edgemarking
Fonts
Graphics
Labels
Page density
Paper sizes
Paper stock
Stitch commands
Transparencies
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE
Results when run on DP 180 LPS
Job prints if DP 180 LPS has a bypass
transport and the finishing device is
required by the job. Otherwise, it does
not run.
Job prints. Operator needs to redefine
clusters if trays differ.
Job prints
Job prints if the fonts and character sets
used are loaded on the DocuPrint 180
LPS or if substi-tutions for these fonts
are defined.
Job prints if sufficient graphic memory is
available.
Job prints using only paper labels. Refer
to the Xerox DP 180 LPS Operator
Guide for loading instructions.
Job prints.
Job prints.
Job prints if it does not use edge
reinforced 3-hole stock.
No stitcher available on DP 180 LPS,
therefore stitch commands are ignored
and job prints unstitched.
Job prints.
Advertisement
Table of Contents
