Xerox DocuPrint 180 Product Manual page 60

PRODUCT DIFFERENCES/USER CONSIDERATIONS
5-6
Table 5-4. Will this 4850 (V3.7) job print on my DP 180 LPS?
Job features from 4850
(V3.7)
Clusters
Color
Edgemarking
Fonts
Graphics
Labels
Paper density
Paper sizes
Paper stock
Stitch commands
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE
Results when run on DP 180 LPS
Job prints. Operator needs to redefine
clusters if trays differ.
Jobs will compile, process and print in
black ink and shades of gray. The
system will alert the operator if a job will
not print correctly, but the system will not
roll over. Precompiled color forms will
print in black and shades of gray,
however, the DP 180 LPS does not
compile color forms.
Job prints.
Job prints if the fonts and character sets
used are loaded on the DocuPrint 180
LPS or if sub-stitutions for these fonts
are defined.
Job prints if sufficient graphic memory is
available.
Job prints using only paper-faced labels.
Refer to the Xerox DP 180 LPS Operator
Guide for loading instructions.
Job prints.
Job prints.
Job prints.
No stitcher available on DP 180 LPS. As
a result, stitch commands are ignored
and job prints unstitched.