Print Rates - Xerox DocuColor 2060 Operator's Manual

T D
E CH N I C A L A T A
:
Substrate
2
64 - 80 g/m
81 - 105 g/m
106 - 135 g/m
136 - 150 g/m
151 - 220 g/m
221 - 280 g/m
Transparencies
7–4

Print Rates

Use the Productivity Setting in the Tools Mode to optimize the throughput speed
for the type of paper you run most frequently. This feature is available only for
the DocuColor 2060.
• Selecting Auto selects a Fuser temperature based on the paper weight
selected on the paper tray, improving average power consumption, but
slowing operation while the Fuser heats up or cools down.
• Selecting Light Weight sets the Fuser temperature to 160
optimizes the throughput speed for light weight papers, and uses less
power.
• Selecting Heavy Weight sets the Fuser temperature to 175
optimizes the throughput speed for heavier papers, and uses more power.
Refer to the Systems Administrator Guide for the procedure.
The DocuColor 2045 speeds for each paper weight are listed in this table and
cannot be changed.
DocuColor
2045
Heavy Weight
45 ppm* 45 ppm
2 45 ppm 45 ppm
30 ppm 60 ppm
2
2 30 ppm 30 ppm
2 22.5 ppm 30 ppm
22.5 ppm 22.5 ppm
2
22.5 ppm 22.5 ppm
Table 1. Substrate Print Speeds
*ppm = prints per minute
DocuColor 2060
Light Weight
45 ppm 45 ppm
60 ppm 60 ppm
30 ppm 60 ppm
30 ppm 30 ppm
22.5 ppm 30 ppm
22.5 ppm 22.5 ppm
22.5 ppm 22.5 ppm
2 0 60 /2 0 45
D O C U C O L O R
o
C, which
o
C, which
Auto
O P E R A T O R M A N U A L