Xerox DocuColor 2060 Operator's Manual page 269

2 06 0 /2 04 5
D O C U C O L O R
Problem
The Control Panel
Touch Screen does not
respond to a touch
command.
You cannot program a
job while a screen is
open.
Digital press with
scanner features are
not selectable.
O P E R A T O R M A N U A L
Suggested Solution
• Press Clear All on the Control Panel.
• Touch a selectable button on the Touch Screen.
A slight pressure is required to cause the
digital press with scanner to react.
• If the problem persists, open the Front Door of
the digital press with scanner. Close the Front
Door and make a selection on the Touch
Screen. If the Touch Screen does not respond
to any touch commands, switch off the power.
Wait 15 seconds. Then switch on the power.
Reprogram the digital press with scanner for
the copy features that are desired.
Jobs cannot be programmed or copies made while
some screens, such as administration screens, jam
clearance screens, or consumable status
information screens, are open. Follow the
directions on the information screen. Then program
the desired job.
Certain features cannot be selected because of the
previous selections. Generally, features or buttons
you can select appear selectable to indicate you
can use them with the previous selections. Refer to
the "Overview" chapter for more information about
buttons.
P S
R O B L E M O L V I N G
6–3