Raster Image Processor (RIP)
Digital Press Specifications
Electrical Power Requirements (200/240 - 50/60 Hz)
2 06 0 /2 04 5
D O C U C O L O R
7.
Technical Data
Refer to the documentation that comes with your RIP.
Specifications
Single phase - Three wire plus safety ground
Current service - 30 Amp sole use @ 200V to 240V
Range (line to neutral) - 200 V minimum to 240 V maximum
Frequency - 50/60 Hz
Power Consumption
Standby - 2.6 KVA maximum
Run - 4.8 KVA maximum
Power Saver - 1.9 KVA maximum
17
O P E R A T O R M A N U A L
20 Amp sole use @ 220V to 240V
7–1