Inserts - Xerox DocuColor 2060 Operator's Manual

S
C A N N E R
4–78

Inserts

Inserts allows you to insert blank or preprinted sheets into a job after
predetermined pages. Inserts must be the same size and orientation as the paper
used for the body of the job and can be loaded into any of the available trays. An
image cannot be printed on an insert. Inserts are not subject to billing.
Up to 10 inserts can be placed in a single set of a job. Up to 300 inserts can be
inserted into the sets of a job. (For example: If you choose to have 10 inserts
placed in a single set of output for a job, you will be able to run 30 sets of the
job.)
You cannot place more than one insert in the same predetermined location.
Automatic Tray Switching may be used in combination with the Inserts option.
Output must be Collated, and a specific Paper Tray must be selected on the Basic
Features screen for the Inserts button to appear. Inserts may not be used in
combination with the N-Up, Transparency Options, Booklet Creation, Repeat
Image, or Poster features.
1
Touch the Inserts button on the Output Format screen. The Inserts screen is
displayed.
Figure 62. Inserts Screen
2 0 60 /2 0 45
D O C U C O L O R O P E R A T O R M A N U A L