3 Printer Setup
3.3 CONNECTING THE NETWORK INTERFACE
The procedure for connecting the network interface is explained below. To connect the printer to the
network environment, follow the steps below.
Caution
•
Follow the instructions below when connecting the network interface cable. Otherwise,
electrical shock or fire may occur.
Do not touch the connector.
o
Do not connect the network cable connector to the interface board having different
o
specifications.
Turn off the printer.
Step 1 :
Plug the connector of the Ethernet cable into the connector of the network interface board at
Step 2 :
the back of the printer.
Connect the other end of the Ethernet cable to the network.
Step 3 :
Notes
Refer to "Network interface board operation manual" to use the network interface board.
22
1
Network interface connector
2
Interface cable
8265/8290/8365/8390 User Guide