Controlling The Heater Elements - Xerox 8290 User Manual

Press the [F3] key or the [F4] key on the operation panel.
Step 4 :
The product will perform following operations:
I)
Setup items
Cut & Feed
Notes
If "Take-Up Roll" is set in the media detection setup menu, the product will not operate even if the [F4] key
has been pressed.

4.4.2 Controlling the Heater Elements

If you want to change or check the heater elements, follow the steps below.
Verify the following regarding the condition of the printer.
Step 1 :
It is not currently printing
I)
Press the [F3] key of the operation panel.
Step 2 :
To shift to the heater menu.
I)
4.4.2.1 Change the heater temperature
To change the temperature of the heater, press the [F1] key on the operation panel. The display will
mention the following:
Press the [F2] key to decrease the temperature.
Press the [F4] key to increase the temperature.
Press the [ENTER] key to confirm the requested temperature change.
Press the [CANCEL] key to leave the menu without changing the heater settings.
8265/8290/8365/8390 User Guide
Key name
F3
F4
The 'heater message' can be one of the following:
o
o
o
'A' stands for the heater.
'B' stands for the fixer.
'C' stands for the post fixer.
'D' stands for the dryer.
'S' stands for the Set-temperature (requested
temperature).
'R' stands for the Real-temperature (actual temperature).
Parameters
Forward
Backward
Heater standby
Heater warming up
Heater ready
4 Printer Operation
Description
Feeds media forward.
Feeds media backward.
85