The MEDIA SET lamp will turn off.
Close the front cover.
Step 9 :
Step 10 : The media initial menu is displayed on the operation panel.
3.4.2 Loading Roll Media
3.4.2.1
Installing the media roll
Determine the printable side of the media roll (inside or outside printing) and lay down the
Step 1 :
media roll as shown in the images below.
Position the roll units of the unwinder in such a way that the media roll can be placed in
Step 2 :
between.
Lock one roll unit to the roll unit bar
Step 3 :
Place one side of the roll over the flange of the locked unit.
Step 4 :
8265/8290/8365/8390 User Guide
1 = Roll unit handle
2 = Roll unit
3 = Media roll
3 Printer Setup
25