Table of Contents
Advertisement
Maintenance
Inspecting and Cleaning
the Broom and Traction
Unit
Service Interval: After each use
Clean the machine thoroughly after use. Because
sand is extremely abrasive, the sand should be
flushed off after each use. If the machine is cleaned
frequently, (before the sand has a chance to cake), it
can be cleaned with a stream of water from a hose
with the nozzle removed. A high pressure stream
could drive the sand into wear areas where it could
act as a grinding compound.
Important:
After using the broom do not allow
it to rest on the bristles. The weight of the
attachment will permanently distort the shape
of the bristles and ruin the brooms. Always tip
the broom up onto the attachment adapter after
detaching the rear broom from the traction unit.
Greasing the Attachment
Adapter
If the locking lever on the attachment adapter does
not pivot freely and easily, apply a light coat of grease
to the area shown in
Figure
17.
g003443
Figure 17
10
Advertisement
Table of Contents
