Operation; Adjusting The Rear Broom Angle; Adjusting The Broom Head Angle - Toro 08753 Operator's Manual

Operation

Adjusting the Rear Broom
Angle
You can change the angle of the broom to increase
or decrease its aggressiveness in the sand. Mount
the broom pivot to the bottom holes in the attachment
adapter brackets for less aggressive raking or the top
holes for more aggressive raking
Figure 12
1. Broom pivot
2. Attachment adapter
brackets
(Figure 12).
g003416
3. More aggressive
4. Less aggressive
Adjusting the Broom Head
Angle
You can change the angle of the broom heads in
respect to the ground.
1. Loosen the nut and bolt securing the broom
head pivot brackets
2. Remove the 2 adjustment bolts and nuts from
the broom head pivot brackets
3. Install and secure the adjustment bolts and nuts
into the desired location as shown in
Figure 15, and
Broom Tilted Forward
1. Broom head pivot brackets 3. Adjustment bolts and nuts
2. Loosen this nut.
7
(Figure 14).
(Figure
Figure
Figure 16.
Figure 13
in the forward tilt position
14).
14,
g003418