Table of Contents
Advertisement
Figure 14
Broom Perpendicular to the Ground
1. Broom head pivot brackets 3. Adjustment bolts and
2. Loosen this nut.
Figure 15
Broom Tilted Rearward
1. Broom head pivot brackets 3. Adjustment bolts and nuts
2. Loosen this nut.
g003419
nuts in the perpendicular
position
g003420
in the rearward tilt position
Setting the Transport
Position
Complete the following procedure to increase the
height of the broom when transporting:
1.
Lower the broom and lift assembly as far down
as possible.
2.
Disconnect the chains from the lift arms and
reconnect them higher.
Note:
To ensure the proper operation of the
broom, the chains must be returned to the
original slack position before operating.
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
In particular, you can obtain the following for this
attachment:
•
Wing weights, for use in heavy, wet conditions or
on embankments
•
Stiff bristled brooms
Important:
When installing new brooms, ensure
that you install them with the shorter bristles
towards the front of the attachment.
8
Advertisement
Table of Contents
