Adding Rear Ballast; Applying The Ce Decals; Product Overview; Controls - Toro Reelmaster 6700-D Operator's Manual

Adjusts the downward travel of the front three
cutting units to allow for highly contoured fairways.
4

Adding Rear Ballast

Parts needed for this procedure:
45 kg
(100 Calcium chloride (obtain separately)
lb)
Rear weight kit, part number 104-1478 (obtain
1
separately)
Procedure
To comply with EN ISO 5395 and ANSI B71.4-2017,
add 45 kg (100 lb) of calcium chloride ballast
to the rear wheels and install the rear weight kit
(Part No. 104-1478).
Important:
If a puncture occurs in a tire with
calcium chloride, remove the machine from the
turf area as quickly as possible. To prevent
possible damage to turf, immediately soak the
affected area with water.
5

Applying the CE Decals

Parts needed for this procedure:
1 Warning decal
1 CE decal
1 Year of production decal
Procedure
On machines requiring CE compliance, apply the year
of production decal (Part No. 133-5615) near the
serial plate, the CE decal (Part No. 93-7252) near
the hood lock, and the CE warning decal (Part No.
115-2046) over the standard warning decal (Part No.
115-2045).

Product Overview

Controls

Traction Pedal
The traction pedal (Figure
reverse operation. Press the top of the pedal to
move the machine forward and the bottom of the
pedal to move the machine backward. Ground speed
is determined by how far you press the pedal. For
maximum ground speed, fully press the pedal while
the throttle is in the
To stop the machine, reduce your foot pressure on
the traction pedal and allow it to return to the center
position.
1. Traction pedal
2. Forward speed limiter
3. Red diagnostic light
4. Speedometer
5. Brake pedals
Forward Speed Limiter
Preset the forward speed limiter
the amount the traction pedal can be pressed in the
forward direction to maintain a constant mowing
speed.
Red Diagnostic Light
The red diagnostic light
steering tower, is used to convey several different
messages. While starting the machine, the light
illuminates when the glow plugs are on.
18
20) controls forward and
position.
FAST
Figure 20
6. Parking brake latch
7. Locking pin
8. Reverse speed limiter
9. Key switch
(Figure 20) to limit
(Figure 20), located on
g019447