Table of Contents
Advertisement
Chapter 11
W310 Port Commands
set port vlan-binding-mode
User level: privileged, supervisor.
Use the set port vlan-binding-mode command to define the VLAN binding
method used by ports.
Syntax:
The syntax for this command is:
set port vlan-binding-mode <module/port range> {static | bind-
to-configured | bind-to-all}
Syntax
<module/port
range>
{static | bind-to-
configured | bind-to-
all}
Example:
W310-1# set port vlan-binding-mode 1/5-9 static
Set Port vlan binding method:1/5
Set Port vlan binding method:1/6
Set Port vlan binding method:1/7
Set Port vlan binding method:1/8
Set Port vlan binding method:1/9
290
Description
1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
•
To specify ports 1 to 5, type 1/1-5
VLAN binding method:
•
static - the port supports only the VLAN as configured per
port.
•
bind-to-configured - the port supports the VLANs
configured on the switch.
•
bind-to-all - the port supports the all VLANs known to the
switch.
Avaya W310 Command Reference Guide
Advertisement
Table of Contents
