Using Characters - Xerox WorkCentre M15 User Manual

Using Characters

Various options and tasks may require characters to be entered using the Numeric Keypad.
For example when setting up the machine a name and telephone number can be entered. Use
the instructions below to enter alphanumeric characters.
1
Ø
2
Ø
3
To enter special
l
Ø
characters
(space, plus sign,
etc.) refer to
"Keypad
Character
Assignment" on
page 3-12.
Ø
Xerox WorkCentre M15/M15i User Guide
When prompted by the machine,
enter the character required.
Available characters are
displayed above the numbers on
the Numeric Keypad.
Press the button repeatedly until
the correct letter appears in the
display.
For example, to enter the letter O,
press 6, (labeled MNO). Each
time 6 is pressed, the display
shows a different letter, first M,
then N and O, and finally 6.
To enter additional letters, repeat
the procedure.
If the next letter is printed on the
same button, move the cursor by
pressing , then press the
button labeled with the letter
required.
The cursor moves to the right and
the next letter appears in the
display.
When all the letters have been
entered, press [Enter].
Numeric Keypad
Enter
Page 3-11