Select The Copy Features; Enter The Quantity - Xerox WorkCentre M15 User Manual

Select the Copy Features

4
Only those
l
features relevant
Ø
to the machine
configuration will
be available.
Ø
Ø
i

Enter the Quantity

5
The maximum
l
Ø
copy quantity is
999.
Ø
Page 4-4
To select a Copy feature, press
the feature key required on the
Control Panel.
The current setting for the
selected feature will be displayed.
Press the key repeatedly until the
setting required is displayed.
When the correct setting is
displayed, press [Enter] to save
the selection.
For more information about the available Copy features, refer to "Copy Features" on page 4-6.
Use the Numeric Keypad to enter
the number of copies required.
If necessary, press [Clear/Clear
All] to clear the current quantity
and enter a new quantity.
Copy Features
Numeric Keypad
Clear/Clear All Key
Xerox WorkCentre M15/M15i User Guide