Xerox WorkCentre M15 User Manual page 60

Clone
Collated ON/OFF
Use to produce
l
collated copy
sets.
1 - 2 - Sided OFF
Copy
Use to produce 2
l
Long
sided copy
Edge
output.
Short
Edge
Page 4-8
Use to print multiple images
on a single sheet of paper.
The number of images
produced is determined
automatically based on the
original image size.
Only available using the
l
Document Glass, ensure the
ADF is empty.
Use to produce collated
output e.g. 2 copies of a 3
page job will print one
complete document,
followed by the second
completed document.
Use to switch off 2-Sided
copying.
Produces copies with the
binding orientation along
the long edge of the paper.
Produces copies with the
binding orientation along
the short edge of the paper.
Press [Reduce/Enlarge] repeatedly until 'CLONE'
Ø
displays.
Press [Enter] to save the selection.
Ø
Place the original on the Document Glass, lower
Ø
the cover and press [Start].
The machine pre-scans the original to determine
the number of images to be printed on a page.
The machine completes the job.
Press [Collated] to display the current setting.
Ø
Press [Collated] to select 'ON'.
Ø
Press [Enter] to save the selection.
Ø
Press [1 - 2 - Sided Copy] repeatedly until the
Ø
required setting displays.
Press [Enter] to save the selection.
Ø
Scan 1 - 2 Sided originals using the ADF or the
Ø
Document Glass.
To scan 2 - 2 Sided originals use the Document
Ø
Glass. Scan side 1 and when prompted, turn over
the original and select [YES] to scan side 2.
Repeat the procedure until all originals have been
scanned. Then use the
and press [Enter].
Xerox WorkCentre M15/M15i User Guide
key to select [NO]