Preparation for use
Risk of death and crushing as a result of permanent magnet fields
Severe injury and material damage can result if you do not take into consideration the
safety instructions relating to permanent magnet fields.
• Observe the information in Chapter "Danger from strong magnetic fields (Page 29)".
The rotor is secured in the stator by means of transport locks, and is protected by spacer
film. The original packaging for the built-in torque motor and the transport locks (incl. the
screws) are required for storage/transport purposes and should, therefore, be kept in a safe
place.
Risk of toppling over
Motors, stators, and rotors must not be stacked too high – risk of death, personal injury
and/or material damage.
• Never stack packed or unpacked motors, stators or rotors on top of one another.
• Only transport and store motors, stators and rotors in the horizontal position.
• Observe the safety instructions and handling on the packaging.
1FW6 Built-in torque motors
Configuration Manual, 07/2017, 6SN1197-0AE00-0BP9
WARNING
WARNING
7
465