Technical Features - Siemens SIMOTICS T-1FW6 Configuration Manual

Description of the motor
2.3 Technical features and ambient conditions
2.3.3

Technical features

Note
The values specified in the following table only apply in conjunction with the system
prerequisites described in "System integration".
Table 2- 1
Technical feature
Motor type
Design
Degree of protection according
to EN 60034-5
Cooling method
Pressure in the cooling circuit
Cooler connection
Thermal motor protection
Temperature monitoring
2nd rating plate
34
Standard version of the 1FW6 built-in torque motor
Version
Synchronous motor with permanent magnet rotor, with a high
number of poles (no. of rotor poles: 22 to 98)
Individual components: stator, rotor
Motor: IP23
The final degree of protection (minimum degree of protection:
IP54) of the built-in motor must be realized by the machine
manufacturer.
Water cooling
•
•
•
Max. 10 bar (static)
Motors with a cooling jacket:
Must be connected by customer
Motors with integrated cooling:
Connection with/without cooling connection adapter, see Chapter
"Cooler connection (Page 130)"
1FW605 to 1FW629:
1x PTC for thermistor triplet with response threshold +130 °C
(according to DIN 44081/44082)
1FW609 to 1FW629 in conjunction with KTY 84:
in addition
1 x PTC triplet with response threshold +150 °C
(according to DIN 44081/44082)
Evaluation via Sensor Modules: SME120/SME125/TM120
(see SINAMICS S120 Manual)
1FW6xxx-xxxxx-xxx1 and 1FW6xxx-xxxxx-xxx2:
with 1 x KTY 84 (acc. to EN 60034-11)
1FW6xxx-xxxxx-xxx3:
with 1 x Pt1000 (acc. to EN 60751)
Evaluation via Sensor Modules: SME120/SME125/TM120
(see SINAMICS S120 Manual)
Enclosed separately
Jacket cooling:
size 1FW609, 1FW613, 1FW615
Integrated cooling (1 cooling circuit):
sizes 1FW605 and 1FW606
Integrated cooling (2 cooling circuits):
sizes 1FW616, 1FW619, 1FW623, 1FW629
Configuration Manual, 07/2017, 6SN1197-0AE00-0BP9
1FW6 Built-in torque motors