Control Panel; Symbols On The Display - Pfaff Series 580 Supplement To The Instruction Manual

Controls
2

Control panel

.03
The control panel is used to display and call up the machine functions for setting up and for
sewing operation, for entering parameter values and for reading error messages and service
settings.
The control panel has the following control and display elements:
● The display screen 1 consists of a two-line, alphanumerical LCD display with 16 symbols
● The plus-minus keys 2 are used to select or alter the functions and parameters shown on
● The function keys 3 are used to switch the relevant function on or off. Activated functions
2

Symbols on the display

.03.01
In addition to texts and set values, the following symbols are shown on the display. The sym-
bols only appear in the programmed sewing mode, see Chapter 5.02 Programmed Sewing.
6
1
2
Fig. 6 - 02
per line and is used to show relevant information and selection parameters.
the display.
are shown in each case by an illuminated LED.
Current program number
Current seam sector
Number of stitches in current seam sector
Maximum speed in current seam sector
Number of seam sectors in current seam program
Program number of the seam program to be linked
3