Initial Start-Up; Switching The Machine On / Off - Pfaff 1571 Instruction Manual

Set-up and Initial Commissioning
8

Initial start-up

.04
 Inspect the machine for any damage, particularly the electric cables.
 Clean the machine thoroughly and then oil it, see also chapter 12 Maintenance and
 Arrange for technical staff to check whether the machine's motor may be operated at the
8

Switching the machine on / off

.05
 Switch the machine on (see chapter 7.01 Main switch).
38
Care.
existing mains voltage and whether it is connected properly.
Never operate the machine if there are any differences.
The machine must only be connected to a grounded socket!
Arrange for the home position of the machine drive to be verifi ed by certifi ed
technicians before the initial start-up! Have these settings carried out where
required.