Executing Programs (Automatic); Display All Relevant Mold-Making Functions - Siemens SINUMERIK 828D Manual

2.11
64
General information on workpiece production
2.11

Executing programs (AUTOMATIC)

SINUMERIK Operate provides functions that support the workflow during the execution of mold-
making programs.

2.11.1 Display all relevant mold-making functions

Selection of the various displays during the execution:
Active G and M functions of up to 16 G groups.
Basic blocks, running time and workpiece counters
Program level for nested subprogram calls
Current position and distance-to-go display to the target position
All relevant G code functions for mold-making (Advanced Surface) can be displayed via the
expanded softkey bar with the All G functions softkey. The G functions are color coded, e.g.
CTOL, OTOL for the tolerances.
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling
→ Active
G functions
→ M functions
→ Basic blocks
→ Running time,
→ Program levels
→ All
G functions