Siemens SINUMERIK 828D Manual page 45

General information on workpiece production
If you have supplemented the standard log to include user data, you must program
CYCLE160 so that the user data is written to the log file.
G code program example with call and a measurement function
...
N50 CYCLE150(10,1001,"MEAS_PROTOCOL.TXT")
N51 S_PROTTXT[0]=REP("") ; field, delete all data
N52 S_PROTTXT[1]=" Measure workpiece 1234" ; write user data
...
N70 CYCLE160 ; write user data to the log
N80 CYCLE997(109,1,1,10,1,5,0,45,0,0,0,5,5,5,10,10,10,0,1,,0,)
..
The standard logs can be saved as CSV or text file.
You can use CYCLE150, also without measuring functions, for example, to display texts
for the operator on the complete screen.
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling
2.6
45