Rava® SIP Intercom
Tap Rava Test on the Diagnostics & Advanced screen to display the Rava Diagnostics screen.
Rava Diagnostics Screen
Use the Rava Diagnostics screen to test using the Rava® SIP Intercom with the touch screen.
Rava SIP intercom technology enables hands-free VoIP communication with other Rava-enabled
touch screens and door stations. Rava works over Ethernet, supporting 2-way intercom and
paging without requiring any special wiring.
This screen may be used to call another touch screen that has a Rava SIP intercom, to test and
configure projects, and to adjust various Rava settings.
To place a call to another touch screen with a Rava SIP intercom, enter the extension of
l
the touch screen using the numeric keypad, and then tap Call.
NOTE:
If the intercom functions but the Rava project does not, there is an issue with the
project. If the intercom does not function, there is an issue with the intercom settings.
Use the buttons on the left and right of the screen to view or control various call settings.
l
Product Manual — Doc. 8555D
TS-770 and TS-1070 • 31