Mounting The Cutting Attachment - Stihl FSA 90 R Instruction Manual

3
Position the deflector against the
N
motor housing.
Push hooks (3) on deflector into the
N
recesses in the motor housing.
Insert the screw (4) and tighten it
N
down firmly.
FSA 90 R
Mounting the Cutting
Attachment
Placing Power Tool on the Ground
4
Move the retaining latch to ƒ and
N
remove the battery.
Position your power tool so that the
N
cutting attachment mounting face is
pointing up.
Mounting the Fanwheel
The machine comes standard with a
fanwheel.
Push the fanwheel (1) onto the
N
shaft (2).
NOTICE
The fanwheel is necessary for mounting
cutting attachments.
Mounting Hardware for Cutting
Attachments
The mounting hardware supplied
depends on the cutting attachment that
comes as original equipment with the
new machine.
Machine supplied without mounting
hardware
Only mowing heads may be used which
mount directly to the shaft (2).
Machine supplied with mounting
hardware
Mowing heads and metal cutting
attachments may be mounted.
1
2
Depending on the cutting attachment, it
may be necessary to use the nut (3),
rider plate (4) and thrust washer (5).
These parts are included in a kit
supplied with the machine and are also
available as special accessories.
English
2
3
4
5
13