Switching On - Stihl FSA 90 R Instruction Manual

English
Balancing the Machine
3
2
Loosen the screw (3).
N
Move the carrying ring (2) up or
N
down the shaft – tighten the screw
moderately – let the machine go and
wait until is its balanced – then
check the floating position.
When the correct floating position has
been reached:
Tighten down the screw on the
N
carrying ring firmly.
Detaching Machine from Harness
1
2
Press down the bar on the
N
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
20
Throwing Off the Machine
WARNING
The machine must be quickly thrown off
in the event of imminent danger. To
throw off the machine, use the
procedure described under "Detaching
Machine from Harness". Practice
removing and putting down the power
tool as you would in an emergency. To
avoid damage, do not throw the power
tool to the ground when practicing.
1
2

Switching On

Controls
3
4
2
1 Trigger switch lockout
2 Trigger switch
3 Retaining latch with positions ‚
and ƒ
4 Set wheel – limits travel of trigger
switch – see "Function of set wheel".
1
FSA 90 R