Audio From Digital Devices Cannot Be Played Back (Optical); The Input Source Switches To “Optical In 1” Or “Optical In 2”; “Signal Unlock” Is Displayed - Denon CEOL RCD-N10 Owner's Manual

Contents Connections

Audio from digital devices cannot be played back (Optical)

"Signal Unlock" is displayed.
When digital audio signals cannot be detected properly, "Signal Unlock" is displayed. (v p. 65)
0
"Unsupported" is displayed.
"Unsupported" is displayed when audio signals that are not supported by this unit are input. Check the audio output signal format from your digital
0
device. (v p. 65)
The input source switches to "Optical In 1" or "Optical In 2"
The input source automatically switches to "Optical In 1" or "Optical In 2" when the TV connected to this unit is turned on.
Set "Off" to "Auto-Play". (v p. 89)
0
Front/Top
Rear panel
panel
Playback Settings
122
Remote control
unit
Tips
Index
Appendix