Connection; Wi-Fi Setup; Auto-Scan - Denon CEOL RCD-N10 Owner's Manual

Contents Connections

Connection

Choose whether to connect the home network to a wireless LAN or a
wired LAN.
When connecting to the network using wired LAN, select "Wired" after
connecting a LAN cable.
When connecting to the network using wireless LAN, select "Wi-Fi" and
configure the "Wi-Fi Setup". (v p. 98)
Use the wireless LAN (Wi-Fi) function to
Wi-Fi:
connect to a network.
Wired: Use a LAN cable to connect to a network.
Front/Top
Rear panel
panel
Playback Settings
o Wi-Fi Setup
Connect to a wireless LAN (Wi-Fi) router.
The router can be connected in the following ways. Select the
connection method to suit your home environment.
0 "Wi-Fi Setup" is not displayed in the setting menu when "Connection" in the
n Auto-Scan
Select the network you wish to connect to from the list of possible
networks shown on the display.
1. Select the network you wish to connect to from the list of wireless
2. Enter your password and press ENTER.
98
Remote control
unit
Tips
setting menu is set to "Wired".
networks.
Select "Rescan" if the network cannot be found.
Index
Appendix