Power Does Not Turn On / Power Is Turned Off; Led Is Flashing; Power Is Not Turned On.; Power Automatically Turns Off - Denon CEOL RCD-N10 Owner's Manual

Contents Connections

Power does not turn on / Power is turned off

Power is not turned on.

Check whether the power plug is correctly inserted into the power outlet. (v p. 30)
0
This unit is in standby mode. Press the X button on the unit or the POWER X button on the remote control. (v p. 32)
0

Power automatically turns off.

The sleep timer is set. Turn on the power again. (v p. 75)
0
"Auto-Standby" is set. "Auto-Standby" is triggered when there is no operation for a set amount of time. To disable "Auto-Standby", set "Auto-Standby"
0
on the menu to "Off". (v p. 91)

LED is flashing

Flashing red.
This unit's amplifier circuit has failed. Disconnect the power and contact the repair center.
0
Flashing orange.
The clock is incorrect because the AC was temporarily switched off, etc. Check the network connection and adjust the clock. (v p. 88)
0
Front/Top
Rear panel
panel
Playback Settings
108
Remote control
unit
Tips
Index
Appendix