Playback; Preparations; Turning The Power On; Setting The Layer To Be Played With Priority - Denon RCD-CX1 Owner's Manual

Playback

Preparations

Turning the Power On

ON/STANDBY
Press .
• The power turns on. Press again to set the power to standby.
• When the power is turned on, the function that was being used
when the power was last turned off is selected (vpage 22 "Last
function memory").
GWhen the last function was CDH
When no disc is loaded, "NO DISC" is displayed.
Power indicator
Standby ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Off
Power on ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Red
When the timer is set ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Orange
NOTE
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time or when traveling, either press
off the power, or unplug the power cord from the power outlet.
• Be sure to stop playback before turning the power off.
n Completely turning off the power
Unplug the power cord from the wall outlet.
b Note that the time setting is cleared when the power cord is
unplugged from the outlet.
b The settings made for the various functions may be cleared if the
power cord is left unplugged from a power outlet for an extended
period of time.
Setting the layer to be played with
priority
• The layer that is played with priority when the disc is loaded can be
set.
• Upon purchase, the priority layer is set to the "SA-CD".
1
When "NO DISC" is displayed, press and hold
[MENU/SET]
The current priority layer is displayed.
2
[MENU/SET]
Press
played with priority.
[Selectable items]
SA-CD
: The SA-CD layer mode for Super Audio CDs.
CD
: The CD layer mode for Super Audio CDs.
ON/STANDBY
to turn
This setting is stored in the RCD-CX1's memory and is not canceled
even when the disc tray is opened or closed or the power is turned on
or off. To change the setting, perform the above procedure again.

Loading Discs

In the stop mode, press
b "Loading Discs" (vpage 3).
n To close the disc tray
<2/5>
Press again.
b The disc tray also closes when
NOTE
• The power must be on when opening and closing the disc tray.
• Do not push the disc tray in by hand when the power is off. Doing so
can damage it.
• Do not insert foreign objects into the disc tray. Doing so will damage it.
.
again and select the layer to be
SA-CD CD
<2/5>
to open the disc tray.
1/3
is pressed.

Operations During Playback

Adjusting the Master Volume

<VOLUME> [VOLUME df]
Either turn or press
The volume level is displayed.
~
[Variable range] –90.0dB 0.0dB
b When lowering the volume from –90.0 dB, the display shows
"– –.– dB" .

Input Source Switching

SOURCE
Press to select input source.
CD TUNER
LINE2 LINE1 (iPod)
b The "iPod" indicator is displayed when a Control Dock for iPod is
connected. ("NO iPod" is displayed if no iPod is connected to the
Control Dock for iPod.)

Listening with Headphones

Plug the headphones (sold separately) into the
b The sound from the speakers is automatically cut off.
NOTE
Be careful not to set the volume too high when using headphones.
ENGLISH
.
PHONO
b
<PHONES>
.