Playback; Preparations; Turning The Power On; Setting The Layer To Be Played With Priority - Denon RCD-CX1 Owner's Manual

ENGLISH

Playback

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<2/5> 1/3
ON/STANDBY <PHONES>
ON/STANDBY
[MENU/SET]
[4/o]
SOURCE
1/3
[VOLUME ]
df
[DIMMER]


Preparations

BUTTON

Turning the Power On

<BUTTON>
[BUTTON]
ON/STANDBY
Press
• The power turns on. Press again to set the power to standby.
• When the power is turned on, the function that was being used
SOURCE
when the power was last turned off is selected (vpage 27 "Last
function memory").
GWhen the last function was CDH
When no disc is loaded, "NO DISC" is displayed.
Power indicator
Standby ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Off
Power on ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Red
When the timer is set ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Orange
<VOLUME>
NOTE
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time or when traveling, either press
off the power, or unplug the power cord from the power outlet.
• Be sure to stop playback before turning the power off.
n Completely turning off the power
Unplug the power cord from the wall outlet.
[6/p]
b Note that the time setting is cleared when the power cord is
unplugged from the outlet.
b The settings made for the various functions may be cleared if the
power cord is left unplugged from a power outlet for an extended
period of time.
[PURE DIRECT/
TONE]
[MUTE]
.
ON/STANDBY
to turn
Setting the layer to be played with
priority
• The layer that is played with priority when the disc is loaded can be
set.
• Upon purchase, the priority layer is set to the "SA-CD".
1
When "NO DISC" is displayed, press and hold
[MENU/SET]
.
The current priority layer is displayed.
2
[MENU/SET]
Press again and select the layer to be
played with priority.
SA-CD CD
[Selectable items]
SA-CD
: The SA-CD layer mode for Super Audio CDs.
CD
: The CD layer mode for Super Audio CDs.
This setting is stored in the RCD-CX1's memory and is not canceled
even when the disc tray is opened or closed or the power is turned on
or off. To change the setting, perform the above procedure again.

Loading Discs

<2/5>
In the stop mode, press to open the disc tray.
b "Loading Discs" (vpage 3).
n To close the disc tray
<2/5>
Press again.
1/3
b The disc tray also closes when is pressed.
NOTE
• The power must be on when opening and closing the disc tray.
• Do not push the disc tray in by hand when the power is off. Doing so
can damage it.
• Do not insert foreign objects into the disc tray. Doing so will damage it.