Playing Analog Input - Denon CEOL RCD-N10 Owner's Manual

Contents Connections
0 When "TV Input" is set in the menu, this unit automatically turns on when the TV
connected to the unit is turned on, and the input source switches to "Optical In 1"
or "Optical In 2". (v p. 89)
NOTE
0 Do not input non-PCM signals, such as Dolby Digital and DTS. This causes noise
and could damage the speakers.
o Specifications of supported audio formats
See "DIGITAL IN" (v p. 132).
Front/Top
Rear panel
panel
Playback Settings

Playing analog input

1
2
3
66
Remote control
unit
Tips
Prepare for playback.
Check the connection, then turn on this units.
Press ANALOG IN to switch the input source to
"Analog In".
Play the component connected to this unit.
Index
Appendix