Teamviewer; A.4.1.Security Setting - Furuno WR2120 Operator's Manual

A.4. TeamViewer
This software is the place allows using remote control via internet. If suddenly the radar's facility is prohibited of
using it, please uninstall this software. (Refer to the Installation manual of this uninstallation)
A.4.1. Security setting
This is a process for changing the password of the "TeamViewer" for remote access. Factory default setting is
"root". It is highly recommended to change the default password to reduce security risks.
1) Open the panel of TeamViewer and click the option
"mark" button on the right center.
2) Click the "Security" from the options screen and
enter any password.
Please keep the password somewhere safe.
3) Click [Security] on the left list of [TeamViewer
options]
4) Click [Configure] of [Black and whitelist] under a
menu of [Rules for connections to this computer].
5) If required register any ID's on the list for [Deny
access for the following IDs and partners] or [Allow
access only for the following IDs and partners] from
Popup menu of [Black and whitelist].
This recommendation is to enter the E-mail
address of the local TeamViewer instead of ID for
raising this security when adding account on
Whitelist [Allow access only for the following IDs
and partners].
76