Operating Procedure; Startup The Radar System - Furuno WR2120 Operator's Manual

1. OPERATING PROCEDURE

1.1. Startup the Radar System

1) Turn on the power of the Data Processing Unit and place the main outlet to supply a power
for the Antenna Unit and the Signal Processing Unit
< Caution >
For safety, make sure the breaker of the SPU is OFF before plug-in to the main outlet.
The Antenna Unit and the Signal Processing Unit are in the waiting status.
2) Turn on the breaker of the Signal Processing Unit
3) Start observation by the RainMap in the Data Processing Unit
Radar outputs the data periodically with displaying images, and displays the data image.
In process
1. The breaker is in the Signal Processing
Unit.
2. Turn ON/OFF the breaker for ATU/SPU.
1