Table of Contents
Advertisement
Upload System
System Configuration
Configuration
Upload
Upload
System
Configuration
Use this procedure to install a system configuration
file and/or a custom language file.
1. If necessary, follow
Download System Data, page
automatically generate the proper folder structure
on the USB flash drive.
2. Insert the USB flash drive into the USB port of
computer.
3. The USB flash drive window automatically opens.
If it does not, open the USB flash drive from
within Windows Explorer.
4. Open the Graco folder.
5. Open the system folder. If working with more
than one system, there is more than one folder
within the Graco folder. Each folder is labeled
with the corresponding serial number of the
control interface. (The serial number is on the
back of the control interface.)
6. If installing the system configuration settings file,
place the SETTINGS.TXT file into the UPLOAD
folder.
7. If installing the custom language file, place the
DISPTEXT.TXT file into the UPLOAD folder.
8. Remove the USB flash drive from the computer.
9. Install the USB flash drive into the USB port on
the control interface.
10. The menu bar and USB indicator lights indicate
that the USB is downloading files. Wait for USB
activity to complete.
11. Remove the USB flash drive from the USB port.
Note
If the custom language file was installed,
users can now select the new language
from the Language drop-down menu
in the Advanced Setup Screen 1. See
Advanced Screen 1, page 41
3A7370B
Clean the
Clean
Clean
Use any alcohol-based household cleaner, such as
glass cleaner, to clean the control interface.
36, to
Control Interface Setup and Maintenance
the Screen
Screen Surface
Surface
the
Screen
Surface
37
Advertisement
Table of Contents
