Events Screen - Graco HydroShield WMBH00 Instructions - Parts Manual

Home Home Home Screen
Do Not Not
Do Do Not Activate Do Not Fill to prevent the pump
Fill Fill Fill from refilling when the trigger is released.
Do Not Fill is commonly used at the end
of a paint job. Once the pump is empty,
the system waits until another mode is
selected.
Do Not Fill mode is useful in the following
situations:
While in Spray mode:
• The operator is getting close to the
end of the shift and doesn't want paint
to sit in the pump.
• The remaining number of parts to
spray won't require another full pump
of paint.
• The paint color will be changing soon.
While in Purge mode:
• The operator is done spraying and
is dispensing the last of the paint in
the pump through the gun. Once
the pump is empty, the operator can
easily switch the fluid supply hose to
cleaning fluid.
Inlet Inlet air Inlet air A green inlet air status bar indicates the air
inlet air supply pressure is above the
minimum required 70 psi (0.5 MPa, 4.8
bar).
Red indicates the system cannot run
because the required air pressure is not
detected.
Ground A ground rod icon indicates that the
Ground Ground
rod rod rod ground rod (N) is down.
A charge icon
ground rod is up and the system is
capable of holding a charge.
Air Pres- Air Air Pres- Pres- Set the air pressure for the gun. If the dot
sure
sure sure is filled, air pressure to the gun is active.
3A7370B
Screen Key Screen Key Key
indicates that the
Home Home Home Screen
Fluid
Fluid Fluid Set the fluid pressure for the gun. If the
Pres- Pres- Pres- dot is filled, fluid pressure to the gun is
sure
sure sure active.
Volt Volt Volt Displays the system voltage level.
Level
Level Level
Fluid
Fluid Fluid Displays the pump fluid level.
Level Level Level
• 0% (Empty)
• 50%
• 100%

Events Screen

Events Events Screen Screen
Use the Events screen to view the last 99 status
messages generated by the isolation system. Click
the up and down arrows on the right of the screen to
scroll through the messages.
Each message line includes the date, the time, and
the status code. See Error Codes, page
Run Menus
Screen Key Screen Key Key
(Full)
54.
39