Table of Contents
Advertisement
Available languages
Available languages
EN
4. STEP 3
Take the bushing (B-7) and pass it through the front post (B-2) in each side.
Pass the axle through the wave washer (N-7) and the lower handlebar (K-R/L) ,and
then fix with the flat washers (N-8) and allen screw (N-6) in each side.
Pay attention : Please use two allen key tools to screw allen bolt ( N-6 ) on both side
at the same time.
Assemble the bolts (N-10 & N-11), wave washer (N-14) to the pedal arm axle (D-15) with Allen
wrench (P-1).
Screw the spring washer (N-15), nuts (N-12,N-13) to the cranks (D-
15 & D-16) and the pedal post (L-1) with wrench .
Advertisement
Table of Contents
