Select: (Main) Menu - Comtech EF Data MBT-5000A Installation And Operation Manual

5.2.1

SELECT: (Main) Menu

SELECT: Config Monitor
Info Utility Test (◄ ► E)
Press ENTER or CLEAR to immediately access the SELECT: menu screen from the opening
screen. From any nested menu, press CLEAR repeatedly until this screen reappears. Then, use
the ◄ ► arrow keys to select from the menu branch choices shown.
Unless otherwise noted, all menu functions are typical for use with Converter
(Side) A and Converter (Side) B operation.
The menu branches available from the SELECT: (Main) Menu are as follows:
Menu
Branch
Config
Monitor
Info
Utility
Test
Front Panel Operation
Sect Function
(Configuration) Used to fully configure the MBT-5000A.
5.2.2
Used to monitor the alarm status of the unit, to view the log of stored
5.2.3
events, and to display the Receive Parameters screen.
(Information) Used to view information on the unit, without having to
5.2.4
go into configuration screens.
Used to perform miscellaneous functions, such as setting the Real-
5.2.5
time clock, adjusting the display brightness, etc.
Used to run diagnostics tests on the front panel LEDs and VFD to
5.2.6
verify operation.
MBT-5000A L-Band Up/Down Converter System
5–7
Revision 1
MN-MBT-5000A