Table of Contents
Advertisement
54/68
Handling
Bosch Rexroth Mellansel AB, Intallation and maintenance manual, Hägglunds VI, RE 15310-WA/10.2015
4 Handling
4.1 Instructions for storage
At delivery, the motor has been protected internally with an oil film and externally
with an anticorrosion film which is sufficient p rotection for indoor storage in a
temperature location for up to approximately 12 months.
IMPORTANT! The anti-corrosion protection must be complemented after transport
and handling.
If the motor is to be stored for more than 3 months in a not temperate location and
12 months in a tempered location, it must be filled with oil and placed with the
cylinder block upwards. See 2.3, "Choice of hydraulic fluid".
Fill the motor with filtered oil in the following order, see figure below: "1", "D1", "C"
and "A".
Take great care that impurities do not get inside the motor with the oil. Plug the
connections so that their threads are protected and no impurities can enter the
motor. Check that all plugs are properly tightened. Motors which are kept in storage
must be regularly rotated (once a month) a few turns to maintain an oil film over all
internal parts of the motor.
Quantity of oil required to fill respective motor types:
A
Fig. 68:
Series
Litres
44
64
84
1
Volume
US gallon
35
9.2
40
10.6
80
21.1
D
1
C
Hide quick links:
Advertisement
Table of Contents
