Bosch Rexroth Hagglunds VI 44 Series Installation And Maintenance Manual page 21

Steel:
SS 2134-01
DIN St E39
BS 4360 Grade 50C
Total play:
TAC 1000-K
0.42-0.73 (0.017-0.029)
TAC 1250-B
0.45-0.80 (0.018-0.032)
Fig. 18: Mounting of stiff attachment
Mounting of torque arm on series 84
The pivoted attachment is to be mounted and adjusted as shown in figure 19 and 20.
Checking
Check that the free end of the torque arm is able to move within the directions and
tolerances at the attachment as prescribed in figure 18 and 19.
For lubrication of the torque arms, see 4.4 "Periodic maintenance".
Fig. 19: Mounting of pivoted attachment
Hägglunds VI, RE 15310-WA/10.2015, Intallation and maintenance manual, Bosch Rexroth Mellansel AB
Alternate position
Protected against corrosion, after welding.
x = ± 2 mm (0.079) misalignment in installation.
x ≤ ± 15 mm (0.59) movement when in use.
25
°
a£±
Alternative
position
Steel:
EN 10113S355N
10
DIN St E39
BS 4360 Grade 50C
Protected against corrosion, after welding.
Installation 21/68
x