Bosch Rexroth Hagglunds VI 44 Series Installation And Maintenance Manual page 33

Installation 33/68
Adjustment of brakes with braking torque.
The value of the braking torque must be used when checking the adjustment. Read
from the diagram if adjustment is necessary.
See "Brake adjustment without braking torque" for the adjustment procedure.
Example: With BA-63, a line force F of 100 000 N and a line drum of radius r =
0.5 m, the braking torque is Mb = 50 000 Nm. The brake is to be adjusted if the
measurement FK is less than 77 mm (3.03 in). Adjust FK to 91 mm (3.58 in). See the
diagram for BA-63.
Hägglunds VI, RE 15310-WA/10.2015, Intallation and maintenance manual, Bosch Rexroth Mellansel AB